How to Clean NXTElite Card Printer

  1. Open the printer cover.
  2. Remove the ribbon.
  3. Close the cover and press until a click is heard.
  4. Open the card feeder.
  5. Remove the cards and using the lever, set the card thickness to the max position.
  6. Double-click on the power button on the control panel.
  7. Remove the film from the adhesive card and insert it into the feeder, adhesive side up. The cleaning starts.
  8. When the cleaning is over, the used adhesive card is ejected into the output hopper.

Note: Before using the printer, remember to reset the gauge to the desired card thickness.

Watch Video Tutorial

Download PDF